LP-563
Side Belt Driven Case Sealer With Pack Station (LP-563)
Lines that run a separate case-forming step ahead of sealing add a station, an operator, and a handoff point that slows the whole process down. The LP-563 side belt case sealer removes that step by folding and staging empty cases before they ever reach the sealing head.
As an automatic case sealer, the LP-563 pairs a side belt drive with an integrated pneumatic pack station. The pack station folds the bottom flaps and stages the case automatically, so operators load flat or partially formed cartons instead of pre-folding them by hand. The machine runs on standard 110V single-phase power and seals at 20 meters per minute, handling roughly 20 to 30 cartons per minute depending on case size. It integrates with existing carton sealers already on the line, which means a plant can add pack-station automation without replacing sealing equipment that still works.
- Machine Type: Case Sealer With Packing Station
- Power Supply: 110 Volt Single Phase
- Sealing Speed: 20M/Min
- Capacity: 20~30 Cartons Per Minute
- Tape Width: 2 Inch or 3 Inch
- Machine Size: 48x31x56
- Shipping Size: L50.6″xW32.9″xH58″
Note: Specifications are subject to change without notice.
Specifications
|
Spec |
Detail |
|
Machine type |
Case sealer with packing station |
|
Power supply |
110V single-phase |
|
Sealing speed |
20 meters per minute |
|
Capacity |
20 to 30 cartons per minute |
|
Tape width |
2" or 3" |
|
Folding range (max) |
20 x 16 x 20 inches |
|
Folding range (min) |
10 x 8 x 4 inches |
|
Machine size |
48 x 31 x 56 inches |
|
Shipping size |
L50.6" x W32.9" x H58" |
Built to Combine Two Steps Into One
The pneumatic folding system is the core of what makes this a case sealer machine and a case former in one footprint. It handles cartons from 10x8x4 inches up to 20x16x20 inches without a manual changeover, so lines running mixed case sizes don't need to stop and reconfigure between runs.
The LP-563 also ships with:
- Adjustable table height, to match infeed conveyor elevation across different lines
- Locking casters, so the unit can be repositioned without disassembly
- Compatibility with existing carton sealers, for plants adding pack-station capability to equipment already in place
That last point matters for procurement teams evaluating the LP-563 against a full sealer replacement: the pack station is built to sit ahead of a sealer that's already doing its job, not force a rip-and-replace.
Where It Fits on the Line
The side belt case sealer with pack station is built for operations that currently fold cases by hand before sealing them, or that run separate forming and sealing stations and want to consolidate the two. If your cartons already arrive pre-formed, a top belt driven case sealer or random run case sealer handles sealing alone at higher throughput. For food-grade or washdown environments, the stainless steel case sealer covers that requirement instead. See the full lineup on the Case Sealers page.
Landen Strapping's engineers can review your current case-forming and sealing setup and confirm whether a pack station, a higher-speed sealer, or a different configuration fits your line best. Request a quote to get sizing and pricing for your operation.
Product Description
Our LP-563 integrates our most reliable tape heads with our pneumatic folding pack station.The auto folding pack station folds and stages empty cases thus simplifying the load process while increasing line speeds. The LP-563 incorporates the same durable tape head and belt design as our LP-553 sealers, ensuring hassle-free maintenance and allowing production to operate at peak efficiency.
FAQ
What does the pack station do on the LP-563 side belt case sealer?
It folds the bottom flaps of the carton and stages the case automatically, ahead of the sealing head, so operators don't need to pre-fold cases by hand before loading them.
How fast does the LP-563 run?
It seals at 20 meters per minute and handles roughly 20 to 30 cartons per minute, depending on case size.
Can the LP-563 work with a case sealer we already have?
Yes. The pack station is built to integrate with existing carton sealers, so plants can add folding automation without replacing sealing equipment already in place.
What carton sizes does the folding station handle?
The pneumatic folding system handles cases from 10x8x4 inches up to 20x16x20 inches without a manual changeover.
WE BUILD CUSTOM STRAPPING SOLUTIONS FOR YOUR INDUSTRY
Landen offers customers custom design configurations on specialized automatic strapping systems instead of the industry standard “out of the box” solutions.
lEARN MORE ABOUT OUR CUSTOM MACHINESView Other Case Sealers
The LP-553X is the most popular machine in our case sealing division, known for excelling in general applications and performing flawlessly…
The LP-555A is a cutting-edge, fully automatic case sealer that handles case sizes ranging from 12 to 20 inches. Equipped with built-in…
The LP-551TB is equipped with a new patented tape head and top and bottom powered conveyor belts, ensuring efficient sealing. Its flexible…
The LP-557F is equipped with a patented tape head and powered conveyor belts, ensuring efficient sealing. Its flexible cushioned mast…
cONTACT oUR TEAM OF eXPERTS
We’d love to hear from you! Whether you have a question, need support, or just want to share feedback on our products, our team is here to help. Please fill out the contact us form and we will get back to you as soon as possible.