• Column mounted rotary arm.

  • FR included, optional air compressor available for additional charge

  • AC variable frequency drives and motors for safe, reliable performance and minimal maintenance

  • 20” NO-THREAD® powered pre-stretch carriage for quick, easy and safe film loading

  • Proven Cut & Wipe Film Treatment System

  • 25” ring gear bearing drive

  • 12 RPM variable speed

  • Unlimited load weight capacity

  • Up to 50 loads per hour

Production Rate:  Up to 50 loads per hour *

Load Size:  56”W x 56”L x 80”H  (80” diagonal)

Load Weight:  Unlimited

Machine Dimensions:  130”W x 135½”L x 119 7⁄8”H **

Approximate Shipping Weight:  1,850 lbs.

Electrical Requirements:  120V/1/60 15A


  • Allen Bradley Micrologix 1200 PLC
  • 24V control system
  • Current overload protection
  • Nema 4⁄12 control cabinet with quick disconnect
  • Auto-height sensing photo eye with on⁄off switch
  • Power on⁄off switch and indicator light
  • Start⁄stop push button
  • Large emergency stop (push pull type) on control panel
  • Manual carriage up⁄down switch
  • Variable rotary arm speed (12 RPM)
  • Separate up and down carriage speeds
  • Separate top and bottom wrap selectors (0-9)
  • Reinforce wrap⁄manual rotation control
  • Positive arm alignment controlled by proximity sensor
  • Top cover pause switch (Splash-proof Program)
  • Spiral up or spiral up⁄down switch
  • Film force to load control
  • Double brush dust tight slip ring
  • Emergency stop sensor for arm path obstruction
  • Panel can be located up to 10′ from machine frame

Film Delivery System:

  • 20” NO-THREAD® Powered Pre-Stretch Carriage
  • 1 HP AC motor with Allen Bradley variable frequency drive
  • 50-300% pre-stretch ratio (preset to customer spec, Std 200%)
  • Electronic film tension control with analog sensor
  • Lexan roller cover for operator safety
  • Film force release for easy pull at start and end of cycle
  • Angled carriage to wrap approximately 2” from floor level

Film Carriage Drive:

  • ¾ HP AC motor with variable frequency drive
  • Two #50 chain carriage lifts for safety
  • Dual ½” CRS ways with UHMW-PE carriage glides
  • Dual structural steel supporting boom
  • Power track for efficient guiding of wires

Rotary Arm Drive:

  • 25” Heavy duty Ring Gear Bearing, with Pinion Gear Drive
  • Max. 12 RPM variable speed
  • ¾ HP AC motor with variable frequency drive
  • Electronic soft start⁄stop
  • Positive arm alignment controlled by proximity sensor
  • Protection guard over the ring gear


  • Column mounting design
  • Floor and top frame mounting
  • Heavy duty structural steel construction
  • Easy access to all components

Anchoring Requirements

  • Wulftec recommends using heavy-duty expansion shields of 3/4″ diameter thread size with a minimum anchor depth of 4″ in concrete.
  • To be I-beam ( 6” to 8”) mounted, there are 2 anchors at the bottom and also 2 bolts on the top of the machine frame.

Technical Information:

  • The machine is provided with a manual including electro⁄mechanical schematics and drawings
  • Trouble shooting guide
  • Installation instructions


  • 3-year unlimited cycle warranty
  • 10-year warranty on 25” ring gear bearings
  • 10-year warranty on structural frame
  • Lifetime warranty on pre-stretch rollers’ blue compound



*Production rate based on load configuration and machine options.


Product Description